How to Fix an Incorrect Audio/Video Sync Setting and Save it Permanently using ‘Avidemux’

Audio to video synchronization‘ is an extremely important aspect of a multimedia file, because when playing, multimedia players rely on it for properly synchronizing the audio and the video tracks. If the synchronization value is incorrect, then the audio (or the video) is going to be played early or with a delay, compared to the other, which is commonly known as ‘lip-sync’ errors, and it jeopardizes all the excitement, obviously.

For instance, while watching a movie, if you have ever come across situations like gunshot firing sounds coming out before its video scene is displayed, then that is due to an improper audio to video sync. This is a pretty common issue in multimedia files and there are many reasons behind its existence, but for keeping the article clear and simple so that anyone can understand its context without having to go through boring technical details, I will not mention them. Sometimes syncing issues are also caused by audio hardware devices (sound cards, amplifiers or even buggy headphones etc). But this method that I’m going to show you, only works if the sync problem lies with the multimedia file. If it’s hardware based, you should be looking elsewhere.

In any case, the good news is, depending on the OS platform that you are using, there are powerful software multimedia players (VLC, KMPlayer, MPLayer etc) that give you the ability to manually adjust the sync (video or audio) setting, thus you can enjoy the multimedia files without such issues.

'Avidemux' running on Windows 8

The problem with that method however is that it only saves the sync setting temporarily, and it will be lost the next time you play it. Therefore, the most ideal solution is to use a video syncing (synchronization) software to fix it. And the good news is that you don’t have to buy a premium software utility, because thanks to a great (and free) open-source tool called ‘Avidemux’, you can save the audio & video out of sync setting permanently for a lots of video & audio codecs (HD, Blu-ray or even 4K videos!) and container formats (MP4, MKV, FLV, MPEG, AVI etc). ‘Avidemu’ is actually one of the best free audio and video synchronization software that you can use (it’s originally intended purpose is actually to act as a simple video editing & encoding software which comes with in-built filters etc).

‘Avidemux’ also supports multiple operating systems, therefore you don’t have to be only a Windows user to use it either. So if you’re having lip-sync errors in one of your multimedia files, then you can try the below ‘Steps’ for a possible fix. While the results are not always guaranteed, ‘Avidemux’ has a good track record. If this method fails, then I’ve added another method that guarantees results in most situations at the end of the article as well.

Update (2017-07-25): Yes it’s been more than four years since I originally wrote this post (yes, even so, I update it from time to time), but the instructions still work. I just added this ‘update’ just to give some confidence to the readers.

Step 1:

First of all, go to this page, download the package and install it (it has pre-built packages for Windows, Mac OS X and GNU/Linux).

Step 2:

Now open ‘Avidemux’ program and load the ‘troublesome’ multimedia file into it.

Step 3:

Before continuing, under the ‘Video Output‘ and ‘Audio Output‘ options, make sure it says ‘Copy’. Also make sure to enable the option called ‘Shift’ (disabled by default), as it is the option that lets you change the audio/video sync setting (shown below).

Enabling few primary options in 'Avidemux'

Any value that you enter here (‘Shift’) should be in milliseconds (1000 milliseconds = 1 second).

Step 4:

Now, if you know what the correct audio/video sync value is then you can skip this and go directly into the end of ‘Step 5‘. If not, click on the ‘Play’ button on ‘Avidemux’ window, so we can observe and see whether the audio comes before or after the video scenes.

How to Sync Audio and Video Correctly?

If the audio comes ‘before’ …

Positive sync value - Avidemux

The rule of the thumb is that, if the audio is played before the video, then that means we have to ‘add time’ to it (thus delaying it), so the video track can ‘catch up’ with the audio track. This is done by entering a positive sync value (say 200 milliseconds) into the ‘Shift’ box.

If the audio comes ‘after’ …

Negative sync value - Avidemux

If it comes few seconds (or milliseconds) after the video scene is displayed, then it is already delayed, therefore, we have to ‘remove time’ from it, thus making it being played early.

One cannot give you the exact audio/video sync value that is needed as it is something that you will have to guess by observing the video playback. However, in my experience, the usual range is 200 milliseconds to 2000 milliseconds (2 seconds). But there can be occasions where it requires one to enter higher values.

Anyhow, unlike above, this time we have to add a negative value as the sync value, in order to make it load earlier (if you enter ‘-200’, then that means the audio will be loaded 200 milliseconds early).

Step 5:

Let’s assume that the file you loaded had an audio track that was being played with a delay. Then to make it play early, we have to enter a negative value. And unless the sync was so big that you could easily tell that the audio came few seconds after the video, I recommend that you start by entering a small negative (say a ‘-100’ milliseconds) value first.

If it fixes the lip-sync a little, then add another -100 (altogether ‘-200’ milliseconds). Then carry it on until you arrive at the optimal audio/video sync value.

However, before every time you apply a different sync setting, first make sure to ‘Pause’ the playback, then add the new value and resume playback. Otherwise ‘Avidemux’ will not apply that setting to the playback.

Proper way of entering audio-video sync values - Avidemux

Note: This is just an example (of course) and depending on your multimedia file, you will have to figure out whether to use a negative or a positive value, but the procedure is just the same.

Step 6:

Once you are satisfied with your new audio/video sync, now all you have to do is to save the changes. But before doing so, just make sure that under the ‘Output Format’ option, you have selected the proper output format.

Choosing the proper container format - Avidemux

For example, if the source file was an AVI file, then make sure to select ‘AVI Muxer’. If it was FLV, then choose ‘FLV Muxer’ etc.

‘Avidemux’ doesn’t have like a huge list there, but it supports saving into AVI, FLV, MP4, MPEG-TS, MKV etc. If your input file has a different format than listed there, then you can choose ‘MKV Muxer’ as it supports storing a huge number of different audio and video codecs.

Note: Please be aware that, if you put audio/video that were previously stored in an AVI file into a MKV container, then sure MKV will store them without any issues. But most commercial hardware devices (iPad for example) will struggle to play it afterwards. This does not concern the computer users as most popular players support playing the awesome MKV format.

Update: Sometimes while trying to fix a MP4 file, though you might be able to successfully fix it and play it in ‘Avidemux’, the corrected sync value might simply be lost, after saving it into a new MP4. If this occurs, then I advice you to try selecting ‘MP4v2 Muxer‘ rather than using the ‘MP4 Muxer‘ (under ‘Output Format‘). I have been able to successfully save the corrected sync settings of certain MP4 files, by simply making that change alone!.

Update 2: If that doesn’t work, then try changing the audio output from ‘copy’ to ‘MP3 Lame’. Yes this will re-encode the audio file, but it shouldn’t take a long time since encoding an audio track isn’t as difficult or time consuming as encoding a video file. I haven’t tried this, but someone called ‘John’ in the comment section let me know of this which has worked for him under Windows XP. I just have a gut feeling that this might work for all those of you who doesn’t seem to get an audio track in the output file after fixing the lip sync issue.

Step 7:

Once all is done, from its menu click on: ‘File’ -> ‘Save’ to save the changes permanently.

Depending on the length of the video, the time it takes will differ, but it should not take much longer (pretty much like copying that file over to somewhere else) since nothing gets re-encoded.

Saving a file - Avidemux

When it is finished saving, you can open that file using any media player, and if the sync value you entered was correct, then it should be playable without any sync issues. Well, that is it!.


Update: Some readers have complained that ‘Avidemux’ software is not always working for them when correcting the audio and video synchronization. So I wrote another method that uses another software tool (it involves two tools actually), which is known to work most of the time for correctly syncing the audio and the video. However, that method only supports saving your input files (you can input almost anything into it AVI, MPEG, MP4, FLV …) into ‘MKV’, which as briefly mentioned above, is not playable on certain hardware based multimedia players.

You can read about it from here.

251 thoughts on “How to Fix an Incorrect Audio/Video Sync Setting and Save it Permanently using ‘Avidemux’”

  1. Just wanted to add a “me too”. I had somehow completely spaced the “Shift” option in AVIDemux, and that did the trick perfectly. Nothing worse than a concert video which looks badly-dubbed: problem solved!

    Reply
  2. You rock! Trying to fix out of sync audio with VLC player was a nightmare and I simply gave up on it. Your tutorial was clear and concise. Had all three videos fixed in 5 minutes. Thank you again!

    Reply
  3. Thanks for this information which I have only just found. I am dealing with desyncronisation that occurs spontaneously from intermittent problems in a video camera, however it only became obvious when I converted my M2t files to ProRes 422.mov . Thus I need a programme that will handle these files. I was looking for the MKV Muxer but google search gives many possible solutions which I can’t sort out. As so much time has passed from your original article do you have more information that would be pertinent to my problem. Thanks

    Reply
  4. I did a second search with google and found the MKV TooNix, But starting it I could only find a way for multiplexing signls or perhaps sound tracks. I was looking for a way to change the relationship between the audio and video on the current track. The problem being that the video is in a ProRes422 ,mov format. The problem came about when the programme I am using to transccode my video from M2t to Pro res generates huge desynchronisation as a result of glitches from the camera that I am not skilful enough to detect and remove. I am therefore forced to try to correct this after the event.

    Reply
  5. Windows 10 here and it’s working great now that I got it figured out. Had some issues with an .mkv file oddly and the part with changing from copy to MP3(lame) worked.

    Reply
  6. Hi I need to fix the audio in just the first 8 mins of a tv show, the audio from 8 mins onwards is in sync. Is there something you know of that can fix this for me please?

    Thanks
    Leeann

    Reply
  7. Years later and this still works. If you have trouble telling if the sync is right, just keep playing with it (up and down arrows) until it is. Iʼve been using Avidemux for years. Handy piece of software. And itʼs free.

    Reply
  8. I just came to thank you very much. It worked. Whoever made this tutorial is a very good person, cause it doesn’t have any survey/virus/pop-ups or any bullshet like that; and that person is also smart, cause it’s a very well-explained tutorial. Thanks so much, I very rarely or never, find a tutorial like this on the internet, it’s usually always bullcrap. Greetings from Mexico

    Reply

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.